Cryogenic LNG Pumps LNG Cylinder Regasification Skid Vaporizer Pump Lh2 Lco2 Pumps LNG Regasification Intergrated Skid

• Customization: Available
• After-sales Service: 24 Hours on Line Service
• Warranty: 1year
• Model NO.: SMC-1500
• Application: Wharf, Port, Bus Station
• Component: Gas Station
• Delivery Times: 90days
• Transport Package: 40feet Container
• Specification: SMC-1500L/H
• Trademark: SMC
• Origin: China
• HS Code: 8413810090
• Production Capacity: 20set Per Year

Product Description

Cryogenic LNG Pumps LNG Cylinder Regasification Skid Vaporizer Pump LH2 LCO2 Pumps LNG Regasification Intergrated Skid       
cryogenic liquid oxygen nitrogen argon co2 lng pump workshop
LNG LCNG Refueling Station: 25Mpa LNG Transer Pump Skid
One. Introduction
1.1The medium used in this process system:Liquefied Natural Gas(LNG)
     Design Temperature:-196ºC
     Working Pressure: before submersible pump ≤1.6MPa, after pump≤2.0MPa; L-CNG high pressure   pump before≤1.6MPa, after pump≤25MPa;

1.2 Physical Parameters of LNG:
Average Molecular Weight:17.3
Main Components:methane(CH4)~ 93.6 %,Ethane(C2H6)~4.12 %
Vaporization Temperature: -162.3ºC(atmospheric pressure)
Liquid Density:~426 kg/m3
Gas Density:0.772 kg/Nm3 (15.5 ºC)
Gas/Liquid Volume Ratio:~625:1(15.5 ºC)
Ignition Point:650 ºC

Remarks:As the LNG varies from place to place, the physical property parameters must be based on the LNG supplier's.

Two.LNG/L-CNG Filling Station Process Flowchart
  

1. Unloading Process: Transfer LNG(liquid natural gas) from the tank truck to the LNG storage tank of the gas station through the LNG submersible pump skid(including the unloading truck and the tank booster) at the gas filling station.
2. Pressurization Process: After unloading, the LNG is pressurized to above 23Mpa by the LNG high pressure pump skid, and then gasified into CNG(high pressure natural gas)by the high pressure vaporizer skid(including high pressure vaporizer, high pressure water bath electric heating reheater, and sequence control panel), and enter the high pressure gas cylinder group for storage.
3. Gas Filling Process: When the pressure in the high pressure gas cylinder group is too low to be able to refill normally, the high pressure pump restarts and vaporizes to replenish and pressurize the high pressure gas cylinder group, and refill the car.
4. Liquid Filling Process: LNG is pressurized to about 1.6Mpa by the LNG submersible pump skid, and LNG is filled into the car bottle group through the pipeline and LNG dispenser.

Three.The General Process Flow Chart is as follows:


LNG/L-CNG Refuel Gas Station Equipment: L-CNG High Pressure Vaporizer Skid 
LNG/L-CNG Refuel Gas Station Equipment: LNG Submerged Pump Skid   LNG/L-CNG Refuel Gas Station Control System
  LNG Dispenser Technical Specification
 

Item	Specification
Flow Range	3-80kg/min
Max Working Pressure	1.6MPa
Working Temperature	-30-+55ºC
Inlet Flow Meter Type	1" low temp mass flow meter E+H/Emerson
Measurement Accuracy	±1%
Minimum Reading Graduation Value	0.01kg or Nm3,L
Single Measurement Range	0-9999.99kg(or Nm3,L)
Cumulative Measurement Range	0-99999999.99kg(or Nm3,L)
Filling Hose	1" stainless steel soft pipe 4m
Return Air Hose	1/2" stainless steel soft pipe 4m
Networking Interface	RS485(use photoelectric isolation 8KV ESD)
Electrostatic Discharge Immunity	4class 8KV
Electrical Fast Transient Pulse Group Immunity	4 class 4KV
Surge Immunity	4 class 4KV
Power Supply	AC220V<200W
Explosion-proof Grade	ExdibellBT 4Gb
Weight	About 325kg

LNG LCNG Refueling Station Equipment: LNG Dispenser
LNG/L-CNG Refuel Gas Station Testing:

Welcome all the foreign customers come to visit our factory and LNG/L-CNG Gas Refueling Station Working Site.Thanks.